> For the complete documentation index, see [llms.txt](https://docs.verge.aero/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.verge.aero/drone-show-software/verge-design-studio/scene-objects/sphere.md).

# Sphere

| Parameter               | Type             | Description                                                                                                                                                            |
| ----------------------- | ---------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| Radius                  | Decimal (Meters) | The distance from the center to the perimeter of the sphere.                                                                                                           |
| Sphere Start Percentage | Decimal          | The percentage position on a sphere where the mapping begins, measured relative to the sphere’s full extent.                                                           |
| Sphere End Percentage   | Decimal          | The percentage position on a sphere where the mapping ends, measured relative to the sphere’s full extent.                                                             |
| Cap Ends                | On/Off           | Truncating a sphere at a specified height or angle so that only part of the sphere is used, with the cut edge forming a defined boundary (often a flat circular face). |

<figure><img src="/files/dUKnozpzGF59lDsXQUlo" alt="" width="351"><figcaption><p align="center"><sub><mark style="color:$info;">The inspector for a sphere</mark></sub></p></figcaption></figure>

<figure><img src="/files/WP2sPbjrGukhq4MM9LF1" alt="" width="281"><figcaption><p align="center"><sub><mark style="color:$info;">Sphere start percentage being manipulated between 0 and .5</mark></sub></p></figcaption></figure>